How to Replaced TY LA1000 Lamp-7 easy step

Television (TV) is a traditional and widely used medium for communication. It is commercially available since the late 1930s. The television’s set has become a very important receiver of information in business or home.
When need to replace?
The replacement of TY LA1000 lamp depends on the user itself. When the brightness of the screen become loss and will appeared dim, you need to think that it is the one the indicator that we need to replaced it.
TY LA1000 Lamp replacement procedure
First of all before you want to replace your TV TY LA1000 lamp you need to turn power off. Take a time and wait until power indicator stops blinking red and then unplug the power cord from the wall outlet. Please make sure that the area around the lamp unit has cooled down to avoid any unwanted accident. The best time to start replaced your TY LA1000 lamp is more than one hour after turn off.

Now you are ready to remove the front cover when the lamp is cooled down. Place your fingertips under the Front cover and pull it from the projection display. This step is so easy but you need should be careful to avoid dangers or risk.

The next step is to loosen the TY LA1000 lamp cover screw by using the screwdriver. Turn the screwdriver anticlockwise to loosen the screw. Before the action begin you first need to read caution and warning labels on TY LA1000 lamp cover. Then, loosen the TY LA1000 lamp cover screw by using a screwdriver.

Loosen the TY LA1000 lamp unit screw with a screwdriver. The next step is to grasp the lamp unit slowly to remove from the projection display. However please allow the lamp to cool before handling or replacing the lamp unit. You need to be caution. This is because the lamp unit is hot immediately after its use, touching it may cause burns.

Now is the time to install the new TY LA1000 lamp unit. You should be careful of the insertion direction. Any misdirection will make your TY LA1000 lamp can’t be installed correctly and maybe not functional.

The replacement procedure nearly finished. Now you had replaced the new TY LA1000 Lamp unit and the next step is to cover screws. Tighten the lamp unit/cover screw with a screwdriver. You can choose either to dipose the old lamp (proper procedure) or you can sell to someone who willing to buy second hand lamp to be repaired. Be caution that you need to attach the lamp unit and lamp unit housing door correctly. This is because if the lamp unit and lamp unit housing door are not attached correctly, the circuited will be activated and the result is you can’t turn on the lamp.

Your new lamp has been replaced. Now you are need to reset the lamp time. Strictly follow the manufacturer leaflet. Now you are ready to enjoy with your new TV lamp. Take care of the lamp warranty form. You will need.